What is another word for straightedge?

Pronunciation: [stɹˈe͡ɪtɛd͡ʒ] (IPA)

Straightedge is a tool that is commonly used to draw straight lines or to check if a surface is straight. There are several synonyms for the word straightedge, including ruler, straight edge, yardstick, and T-square. These tools are essential for engineers, architects, and artists who require precision in their work. A ruler is a flat strip with markings on it, used for measuring. A straight edge is a flat piece of material, often made of metal, used to draw straight lines. A yardstick is a longer version of a ruler, commonly used for measuring larger objects. A T-square is a tool that has a long crossbar and a shorter vertical piece, used for drawing vertical and horizontal lines.

What are the hypernyms for Straightedge?

A hypernym is a word with a broad meaning that encompasses more specific words called hyponyms.
  • Other hypernyms:

    instruments, tools, measuring tools, drafting tools, drawing instruments.

What are the hyponyms for Straightedge?

Hyponyms are more specific words categorized under a broader term, known as a hypernym.
  • hyponyms for straightedge (as nouns)

    • artifact
      hand tool.

What are the opposite words for straightedge?

The word "straightedge" typically refers to a tool used for drawing straight lines or cutting straight edges. However, there are several antonyms for this word that imply a lack of precision or straightness. These include words like crooked, curved, irregular, wavy, and zigzag. Crooked suggests a bending or twisting away from straightness, while curved implies a smooth and gradual deviation. Irregular suggests a lack of consistent shape, while wavy implies a series of repeated curves or undulations. Lastly, zigzag implies a series of sharp turns or angles, rather than a smooth straight line. These antonyms highlight the importance of precision and accuracy when using a straightedge in any type of creative or technical project.

What are the antonyms for Straightedge?

Usage examples for Straightedge

In the figure the other wheel of the pair is shown dotted in at B, and the dead centre is set at the point where the axes of A and B would meet; hence if the largest diameter of the cone of A is turned to correct size, the cone will be correct when a straightedge applied as shown lies flat on the cone and meets the point of the dead centre E. The pinion B, however, is merely introduced to explain the principle, and obviously could not be so applied practically, the distance to set e, however, is the radius a.
"Modern Machine-Shop Practice, Volumes I and II"
Joshua Rose
To test the alignment of the jaws at end F, press a straightedge against the outside face of the hub and measure the distance J, Fig.
"Modern Machine-Shop Practice, Volumes I and II"
Joshua Rose
F is the straightedge, levelled ready to form a guide whereby the line D may be carried forward, as at E, level and straight, to the third target, and so on across all the targets.
"Modern Machine-Shop Practice, Volumes I and II"
Joshua Rose

Word of the Day

Middle Class Populations
The antonyms for the term "Middle Class Populations" are "extreme poverty populations" and "wealthy high-class populations." Extreme poverty populations refer to people who suffer ...